Instruction Manual

TANK-700 Embedded System
Page 70

Disabled DEFAULT
Disabled the console redirection function

Enabled
Enabled the console redirection function
 Term in a l Typ e [VT100+]
Use the Terminal Type option to specify the remote terminal type.

VT100
The target terminal type is VT100

VT100+ DEFAULT
The target terminal type is VT100+

VT-UTF8
The target terminal type is VT-UTF8

ANSI
The target terminal type is ANSI
 Bits per second [115200]
Use the Bits per second option to specify the serial port transmission speed. The speed
must match the other side. Long or noisy lines may require lower speeds.

9600
Sets the serial port transmission speed at 9600.

19200
Sets the serial port transmission speed at 19200.

38400
Sets the serial port transmission speed at 38400.

57600
Sets the serial port transmission speed at 57600.

115200 DEFAULT
Sets the serial port transmission speed at 115200.