Instruction Manual

TANK-700 Embedded System
Page 55
 Hyper-threading [Enabled]
Use the Hyper-threading function to enable or disable the CPU hyper threading function.

Disabled
Disables the use of hyper threading technology

Enabled DEFAULT
Enables the use of hyper threading technology
 Intel Virtualization Technology [Disabled]
Use the Intel Virtualization Technology option to enable or disable virtualization on the
system. When combined with third party software, Intel® Virtualization technology allows
several OSs to run on the same system at the same time.

Disabled DEFAULT
Disables Intel Virtualization
Technology.

Enabled
Enables Intel Virtualization Technology.
4.3.4 S ATA Configuration
Use the SATA Configuration menu (BIOS Menu 6) to change and/or set the
configuration of the SATA devices installed in the system.
Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
Advanced
SATA Controller(s) [Enabled]
SATA Mode Selection [IDE]
Serial ATA Port 0 Empty
Software Preserve Unknown
Serial ATA Port 1 Empty
Software Preserve Unknown
Enable or Disable SATA
Device.
---------------------
 : Select Screen
↑ ↓: Select Item
Enter Select
+ - Change Opt.
F1 General Help
F2 Previous Values
F3 Optimized Defaults
F4 Save & Exit
ESC Exit
Version 2.10.1208. Copyright (C) 2010 American Megatrends, Inc.
BIOS Menu 6: SATA Configuration