Instruction Manual

TANK-700 Embedded System
Page 25
 Reset button
 RS-232
 RS-422/485
 USB
 VGA
 Wireless antenna
3.9.1 ACC Mode Selection
The TANK-700 allows turning the ACC mode on or off. The setting can be made through
the ACC mode switch on the rear panel as shown below.
Figure 3-12: ACC Mode Switch
3.9.2 AT/ATX Power Mode Selection
The TANK-700 supports AT and ATX power modes. The setting can be made through the
AT/ATX power mode switch on the rear panel as shown below.
Figure 3-13: AT/ATX Power Mode Switch