Manual

TANK-600 Embedded System
Page 49
Use the Hyper-Threading BIOS option to enable or disable the Intel Hyper-Threading
Technology.

Disabled
Disables the Intel Hyper-Threading Technology.

Enabled DEFAULT
Enables the Intel Hyper-Threading Technology.
5.3.5 S ATA Configuration
Use the SATA Configuration menu (BIOS Menu 7) to change and/or set the
configuration of the SATA devices installed in the system.
Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
Advanced
SATA Port0 Not Present
SATA Port1 Not Present
Configure SATA as [IDE]
Select a configuration
for SATA Controller.
---------------------
 : Select Screen
↑ ↓: Select Item
Enter Select
F1 General Help
F2 Previous Values
F3 Optimized
Defaults
F4 Save
ESC Exit
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
BIOS Menu 7: IDE Configuration
 Configure S ATA as [IDE]
Use the Configure SATA as option to configure SATA devices as normal IDE or AHCI
devices.

IDE DEFAULT
Configures SATA devices as normal IDE device.

AHCI
Configures SATA devices as AHCI device.