Manual

TANK-600 Embedded System
Page 20
Step 2: Press the reset button. Step 0:
3.7 Powering On/Off the System
WARNING:
Make sure a power supply with the correct input voltage is being fed into
the system. Incorrect voltages applied to the system may cause damage to
the internal electronic components and may also cause injury to the user.
 Power on the system: press the power button for 3 seconds
 Power off the system: press the power button for 6 seconds
Figure 3-10: Power Button
3.8 External Peripheral Device Connection
The following external peripheral devices can be connected to the external peripheral
interface connectors.
 Audio devices
 RJ-45 Ethernet cable
 Serial port devices
 USB devices
 VGA monitor