Manual

TANK-600 Embedded System
Page 16
Figure 3-5: Inserting the HDD
Step 8: Install the HDD bracket in the same position it was before and fasten the HDD
bracket retention screws.
Step 9: Reinstall the bottom cover.
3.3 Mounting the System with Mounting Brackets
To mount the embedded system onto a wall or some other surface using the two mounting
brackets, please follow the steps below.
Step 1: Turn the embedded system to the bottom panel.
Step 2: Align the two retention screw holes in each bracket with the corresponding
retention screw holes on the bottom panel (Figure 3-6).