User guide

TANK-101B/BW Embedded System
Page 24
Figure 3-11: RJ-45 Ethernet Connector
The RJ-45 Ethernet connector has two status LEDs, one green and one yellow. The green
LED indicates activity on the port and the yellow LED indicates the port is linked. See
Table 3-4.
Activity/Link LED Speed LED
STATUS
DESCRIPTION STATUS DESCRIPTION
Off No link Off 10 Mbps connection
Yellow Linked Green 100 Mbps connection
Blinking TX/RX activity Orange 1 Gbps connection
Table 3-4: RJ-45 Ethernet Connector LEDs
3.7.5 3-pin Power Terminal Block
CN Type:
3-pin terminal block
CN Location:
See
Figure 1-3
N Pinouts:
See
Figure 3-12
Connect the leads of a 9V~36V DC power supply into the terminal block. Make sure that
the power and ground wires are attached to the correct sockets of the connector.
Figure 3-12: 3-pin Terminal Block Pinout Location