Owner's manual

TANK-101B/BW Embedded System
Page 50
4.4.1 Host Bridge Configuration
Use the Host Bridge Configuration menu (BIOS Menu 13) to configure the Northbridge
chipset.
Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
Chipset
> OnChip VGA Configuration
Initate Graphic Adapter [PCI/IGD]
******* Memory Information *******
Memory Frequency 800 Mhz
Total Memory 1024 MB
DIMM#0 1024 MB
DIMM#1 Not Present
Config On Chip VGA
Settings.
---------------------
ÅÆ : Select Screen
↑ ↓: Select Item
Enter Select
+ - Change Opt.
F1 General Help
F2 Previous Values
F3 Optimized Defaults
F4 Save & Exit
ESC Exit
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.
BIOS Menu 13: Host Bridge Chipset Configuration
Î Initiate Graphic Adapter [PCI/IGD]
Use the Initiate Graphic Adapter option to select the graphics controller used as the
primary boot device. Select either an integrated graphics controller (IGD) or a combination
of PCI graphics controller. Configuration options are listed below:
 IGD
 PCI/IGD
DEFAULT