User's Manual

Description
ThisdeviceisaRFIDSensorTagreaderforserialiEisensortags,itwasdesignedfor
readoutinstantornearrecentlysensingdatafromeachRFIDsensortags,which
currentlysupporttemperaturetag(ST‐01,ST‐06,ST‐07),ambientlighttag(ST‐02),
temperature&humiditytag(ST‐03),GPStag(ST‐04)andvibrationtag(ST‐05).
E440alsoimplementa107KBUSBdisktostorescannedtagsdataliketagID,current
dataandmaximumandminimumetc.

Charge
STRD‐01couldbechargedbyanyqualifiedUSBwalladaptor,fullchargeitwillneed
around7hour,whenundercharging,theredLEDturnon,afterfinishcharge,the
greenLEDwillturnonandredLEDturnoff.(Flashisnormalwhenitnearfull)

ScanTags
Holdthereadertonearabovethetagaroundat5cmto10cmandthenquickpress
thebuttonandreleaseit,theReaderwillpowerontoscanonceandthenshowthe
scannedcontentonthe LCDandgenerateabuzzerbeep,after3second,theReader
willturnofftheLCDandrecordthecontentintotheitsinternaldiskthenturnoff
itself.

DiskContent
PlugtheReadertoacomputerviaaUSBcablewillseeaUSBdiskappear(E440(E:)),
clickandopenit,usermayseea“RECORD.TXT”inthedisk,itmaybeopenedbyMS
NOTEPAD,MSWORD,orMSEXCELthatanykindsoftexteditor,andlookslike