Owner's manual

SRM-121/SRM-150 LCD Monito
r
Page 64
5.5.2 Cabinet and Rack Installation
The SRM series provides optional rack mount kits for industrial racks. To mount the SRM
series LCD monitor into a cabinet/rack, please follow the steps below.
Step 1: The back of the metal frame surrounding the SRM series LCD monitor has
several retention screw holes for a rack mount kit. See
Figure 1-7 and Figure
1-8.
Step 2: Slide the monitor through the rack mount kit until the rear side of the monitor
frame is flushed against the front of the rack mount kit.
Step 3: Make sure the retention screw holes at the rear of the monitor frame are aligned
with the retention screw holes in the rack mount kit.
Step 4: Secure the rack mount kit to the monitor by inserting and tightening the retention
screws (
Figure 5-9).
Figure 5-9: Secure the Rack Mount Kit