Owner's manual

SRM-121/SRM-150 LCD Monito
r
Page 46
4.3 AV-5300 On-board Jumpers
NOTE:
A jumper is a metal bridge used to close an
electrical circuit. It consists of two or three metal
p
ins and a small metal clip (often protected by a
p
lastic cover) that slides over the pins to
connect them. To CLOSE/SHORT a jumper
means connecting the pins of the jumper with
the plastic clip and to OPEN a jumper means
removing the plastic clip from a jumper.
Figure 4-11: Jumpers
The AV-5300 has two on-board jumpers (Table 4-3).
Figure 4-12: Jumper Locations