Manual

SPCIE-5100DX PICMG 1.3 CPU Card
Page 69
Figure 4-24: VGA Connector
Step 4: Secure the connector. Secure the DB-15 VGA connector from the VGA monitor
to the external interface by tightening the two retention screws on either side of
the connector. Step 0:
4.9 Connecting the SPCIE-5100DX to the Backplane
The SPCIE-5100DX is a PICMG 1.3 form factor CPU card. To install the SPCIE-5100DX
onto the backplane, please follow the instructions below.
Step 1: Align the edge connectors. Align the four edge connectors (labeled A, B, C and
D in
Figure 4-25) on the SPCIE-5100DX with the corresponding connectors on
the PICMG 1.3 backplane. See
Figure 4-25.