Manual

SPCIE-5100DX PICMG 1.3 CPU Card
Page 57
Figure 4-12: Audio Kit Connection
Step 3: Connect the audio devices. Connect the speakers and the subwoofer to the
appropriate audio jack shown in
Figure 4-12.Step 0:
4.7.2 FDD Cable Connection (Optional)
The FDD flat cable connects to the SPCIE-5100DX to one FDD device. To connect an
FDD to the SPCIE-5100DX please follow the instructions below.
Step 1: Locate the FDD connector. The location of the FDD device connector is shown
in Chapter 3.
Step 2: Insert the connector. Connect the FDD cable connector to the on-board
connector. See
Figure 4-13. A key on the front of the cable connector ensures it
can only be inserted in one direction.