Manual

SPCIE-5100DX PICMG 1.3 CPU Card
Page 11
Expansion Slots
PCIe
Model Total Slots System
x8 x4 x1
PCI-X PCI
System Type
SPE-4S 4 One 2* 1 - - - Single
SPE-6S 6 One - 5* - - - Single
SPE-9S 9 One 2* 3 - - 3 Single
SPXE-9S 9 One 2* 2 - 2 2 Single
SPXE-14S 14 One 1* - 12* - - Single
*There are some limitations for certain expansion slots when the SPCIE-5100DX is
installed on the backplane. Please see the section below (Section
1.7.2.1) for more
details.
Table 1-2: Compatible IEI PICMG 1.3 Backplanes
1.7.2.1 Limitations
The limitations for certain expansions slots on the backplanes when installed with
SPCIE-5100DX are listed below.
Backplanes Slot Label Limitation
SPE-4S
PCIEX8_1 The length of the expansion card installed in this
PCIe x8 slot should be less than 21cm.
SPE-6S
PCIEX4_1
PCIEX4_2
The length of the expansion card installed in these two
PCIe x4 slots should be less than 21cm.
SPE-9S PCIEX8_1 This PCIe x8 slot is not supported by the SPCIE-5100DX
SPXE-9S PCIEX8_1 This PCIe x8 slot is not supported by the SPCIE-5100DX
PCIEX1_A1 This PCIe x1 slot is not supported by the SPCIE-5100DX
SPXE-14S
PCIEX8_1 The length of the expansion card installed in this
PCIe x8 slot should be less than 21cm.
Table 1-3: Backplane Limitations