Manual

SPCIE-5100DX PICMG 1.3 CPU Card
Page 119
Step 2: Name the RAID volume. Enter a name for the RAID volume, or press ENTER to
accept the default volume name. Upper and lower case alphabetic, numeric,
space, and underscore characters are all applicable for naming an array. See
Figure A-2.
Figure A-2: Create RAID Volume Name
Step 3: Choose the RAID level. Select a RAID level from the list. RAID levels include
RAID 0, 1, 5 and 10. See
Figure A-3.
NOTE:
RAID 0 and RAID1 levels require a minimum of two hard drives.
RAID 10 level requires a minimum of four hard drives.
RAID 5 level requires a minimum of three hard drives.