User guide
Table Of Contents
- 1 Introduction
- 2 Unpacking
- 3 Installation
- 4 OSD
- 5 BIOS Setup
- 6 System Maintenance
- A Interface Connectors
- B Safety Precautions
- C BIOS Options
- D Terminology
- E Watchdog Timer
- F Hazardous Materials Disclosure
SAILORPC-12A Panel PC
Page 50
Mode Setting [Full On Mode]
Use the Mode Setting option to configure the second fan.
Î
Full On Mode DEFAULT
Fan is on all the time
Î
Automatic mode
The fan adjusts its speed using these settings:
Temp. Limit of OFF
Temp. Limit of Start
Fan Start PWM
Slope PWM 1
Î
PWM Manual mode
The fan spins at the speed set in:
Fan PWM control
Temp. Limit of OFF [000]
WARNING:
CPU failure can result if this value is set too high
The fan will turn off if the temperature falls below this value.
Minimum Value: 0°C
Maximum Value: 127°C
Temp. Limit of Start [020]
WARNING:
CPU failure can result if this value is set too high
When the fan is off, it will only start when the temperature exceeds this setting.
Minimum Value: 0°C
Maximum Value: 127°C