User guide
Table Of Contents
- 1 Introduction
- 2 Unpacking
- 3 Installation
- 4 OSD
- 5 BIOS Setup
- 6 System Maintenance
- A Interface Connectors
- B Safety Precautions
- C BIOS Options
- D Terminology
- E Watchdog Timer
- F Hazardous Materials Disclosure
SAILORPC-12A Panel PC
Page 10
WARNING!
Only remove the protective plastic cover stuck to the front screen after
installation. The plastic layer protects the monitor surface during
installation process.
Step 1: Carefully cut the tape sealing the box. Only cut deep enough to break the tape.
Step 2: Open the outside box.
Step 3: Carefully cut the tape sealing the box. Only cut deep enough to break the tape.
Step 4: Open the inside box.
Step 5: Lift the monitor out of the boxes.
Step 6: Remove the peripheral parts box from the main box. Step 0:
2.2 Packing List
The SAILORPC-12A flat panel PC is shipped with the following components:
Quantity Item Image
1 SAILORPC-12A
1 Power cable
6 Connector cap