Manual

RPC-6106/6108 Rackmount LCD Workstation
Step 2: Slide the top cover toward the rear panel to remove (Figure 4-2). Step 0:
Figure 4-2: Remove the Top Cover from the Chassis
4.5.2 Remove the Drive Bracket
The drive bracket is secured to the RPC-6106/6108 Rackmount LCD Workstation with
four retention screws inside the base of the chassis. To remove the drive bracket, please
follow the steps below.
Step 1: Remove four retention screws that secure the drive bracket to the chassis
(
Figure 4-3)
Page 24