Manual

RPC-6106/6108 Rackmount LCD Workstation
4.4.3 Installation Steps
Complete the following steps to properly install the workstation:
Step 1: Open the top cover.
Step 2: Remove the disk drive bracket.
Step 3: Install the disk drives.
Step 4: Reinstall the disk drive bracket with the installed disk drives.
Step 5: Install the backplane.
Step 6: Install the CPU card.
Step 7: Install the PCI or ISA expansion cards (optional).
Step 8: Connect all required cables.
Step 9: Close the top cover.
Step 10: Mount the workstation.Step 0:
4.5 Installing Components into the RPC-6106/6108
NOTE:
This section gives a generic description of the component installation
process for the RPC-6106/6108 Rackmount LCD Workstation.
Page 22