Manual

PPC-51xxA-G41/WIDS-51xA-G41 Panel PC
Page 34
Removal and reinstallation of some of the components are described in Chapter 4.
4.3 Installation and Configuration Steps
The following installation steps must be followed.
Step 1: Unpack the PPC-51xxA-G41/WIDS-51xA-G41.
Step 2: Set the jumper settings.
Step 3: Install HDD, CompactFlash® and CD drive.
Step 4: Mount the PPC-51xxA-G41/WIDS-51xA-G41 flat panel PC.
Step 5: Connect peripheral devices to the bottom panel of the
PPC-51xxA-G41/WIDS-51xA-G41.
Step 6: Configure the system.Step 0: