PPC-51xxA-G41/WIDS-51xA-G41 Panel PC IEI Technology Corp. MODEL: PPC-51xxA-G41 WIDS-51xA-G41 Industrial Panel PC for LGA775 Intel® Qaud Core CPU TFT LCD, Dual Gigabit Ethernet, Touchscreen, IP 65 Front Panel, RoHS Compliant User Manual Page i Rev. 1.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Revision Date Version Changes 25 November, 2010 1.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Table of Contents 1 INTRODUCTION.......................................................................................................... 1 1.1 GENERAL OVERVIEW ................................................................................................. 2 1.1.1 Model Variations ................................................................................................ 2 1.1.2 Applications .......................................................................
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC 2.6.1 Flat Screen ....................................................................................................... 24 2.6.2 Touch Screen .................................................................................................... 24 2.7 POWER SUPPLY ........................................................................................................ 25 2.7.1.1 ACE-A622A-RS Specifications................................................................
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC 4.11.2 Panel/ Mounting............................................................................................. 58 4.11.3 Rack and Cabinet Installation........................................................................ 63 4.11.4 Arm Mounting ................................................................................................ 63 5 BIOS SETUP ...............................................................................................................
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC 6.2 MOTHERBOARD REPLACEMENT ............................................................................. 108 6.3 BACK COVER REMOVAL ......................................................................................... 108 6.4 DIMM REPLACEMENT ........................................................................................... 109 6.5 ELEVATED PLATFORM REMOVAL .............................................................................110 6.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC List of Figures Figure 1-1: PPC-51xxA-G41 Panel PC ..........................................................................................2 Figure 1-2: PPC-51xxA-G41 Front View........................................................................................5 Figure 1-3: WIDS-51xA-G41 Front View........................................................................................5 Figure 1-4: Rear View .........................................................
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Figure 4-11: CompactFlash® Cover Plate..................................................................................44 Figure 4-12: CD Drive Adapter Installation ................................................................................45 Figure 4-13: CD Drive Retention Screws....................................................................................45 Figure 4-14: Optical Drive Blank Plate Assembly .....................................................
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Figure 6-8: PSU Rear Panel Screws......................................................................................... 114 Figure 6-9: System Cooling Fans Motherboard Connector .................................................. 115 Figure 6-10: System Cooling Fans Left Panel Retention Screws.........................................
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC List of Tables Table 1-1: PPC-51xxA-G41 Model Variations...............................................................................3 Table 1-2: WIDS-51xA-G41 Model Variations...............................................................................3 Table 2-1: PPC-51xxA-G41 Series System Specifications .......................................................13 Table 2-2: WIDS-51xA-G41 Series System Specifications .................................................
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC BIOS Menus BIOS Menu 1: Main .......................................................................................................................69 BIOS Menu 2: Advanced ..............................................................................................................71 BIOS Menu 3: CPU Configuration ...............................................................................................71 BIOS Menu 4: IDE Configuration.............................
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Chapter 1 1 Introduction Page 1
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC 1.1 General Overview Figure 1-1: PPC-51xxA-G41 Panel PC The PPC-51xxA-G41/WIDS-51xA-G41 flat panel PC is for industrial environments like production lines and machine automation. The PPC-51xxA-G41/WIDS-51xA-G41 provides all the features of a PC, combined with a touch panel screen for mouse and keyboard free data input.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Model CPU Power Screen PPC-5170A-G41-E15/R/1G 2.2 GHz Intel® AC input 17” PPC-5170AD-G41-E15/R/1G Celeron® E1500 18~36 V DC input 17” PPC-5170A-G41-Q94/R/1G 2.66 GHz Intel® AC input 17” PPC-5170AD-G41-Q94/R/1G Quad Core Q9400 18~36 V DC input 17” PPC-5190A-G41-E15/R/1G 2.2 GHz Intel® AC input 19” PPC-5190AD-G41-E15/R/1G Celeron® E1500 18~36 V DC input 19” PPC-5190A-G41-Q94/R/1G 2.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Automated manufacturing processes Public information gathering point Plant environment monitoring system Factory automation Manufacturing shop flow Equipment and device control 1.1.3 Features Some of the features of the PPC-51xxA-G41/WIDS-51xA-G41 flat panel PC include: Mainstream panel PC design with dual display function.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC 1.2.1 Front Panel The front panel of the PPC-51xxA-G41/WIDS-51xA-G41 (Figure 1-2) is a flat panel TFT LCD screen surrounded by an aluminum frame. Figure 1-2: PPC-51xxA-G41 Front View The WIDS-51xA-G41 also has wireless antenna and two USB ports protected by waterproof cover on the front panel.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC 1.2.2 Rear Panel The rear panel has a fan vent, four VESA standard mounting holes and several retention screw holes. The VESA mounting holes are circled in Figure 1-4. Figure 1-4: Rear View 1.2.3 Top Panel The top panel has three sets of mounting clamp slot, fan vents and retention screws for securing the drive bay bracket. The retention screws are circled in Figure 1-5 below.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC 1.2.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC 1.2.5 Left Panel The left side panel hosts three cooling fans that cool the interior of the system (Figure 1-7). Figure 1-7: Left View 1.2.6 Right Panel The right panel has a CD-ROM drive bay for CD-ROM drive installation (Figure 1-8).
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC 1.3 Internal Overview The PPC-51xxA-G41/WIDS-51xA-G41 internal components are configured in three levels. The PSU cover bracket to the left (Figure 1-9) supports the hard drive and optical drive brackets. Below the PSU cover bracket is the power supply. On the same level as the power supply is the motherboard. Below the motherboard and PSU level is an LCD panel. An overview picture of the internal components is shown in Figure 1-9 below.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Chapter 2 2 Specifications Page 10
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC 2.1 Introduction The PPC-51xxA-G41/WIDS-51xA-G41 flat panel PC has the following preinstalled components: 1 x Motherboard 1 x TFT LCD screen 1 x Power supply 2 x Cooling fans The technical specifications for these components and the system are shown in the sections below. 2.1.1 System Specifications 2.1.1.1 PPC-51xxA-G41 Specifications The technical specifications for the PPC-51xxA-G41 system are listed below.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC PPC-5150A-G41 Memory PPC-5170A-G41 PPC-5190A-G41 Two 2.0 GB 800/1066 MHz DDR3 SDRAM DIMM (system max. 4.0 GB) Solid State Drive (SSD) One CompactFlash® Type II socket One 2.5” SATA 3Gb/s or IDE anti-shock drive bay Drive Bay One slim type CD-ROM bay Ethernet Two PCIe GbE controllers Audio RealTek ALC888 HD audio codec 1 x RS-232/422/485 4 x RS-232 4 x USB 2.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC PPC-5150A-G41 Operating Temperature Storage Temperature PPC-5170A-G41 PPC-5190A-G41 -10ºC ~ 50ºC -20ºC ~ 60ºC 5 Hz ~ 17 Hz 0.1” double amplitude displacement Vibration 17 Hz ~ 640 Hz 1.5G acceleration peak-to-peak Shock 10G acceleration peak-to-peak (11 ms) Net/Gross Weight 7 kg/11 kg 8 kg/12 kg 12.6 kg/18.2 kg 410 x 309 x 110.5 452 x 356 x 115 483 x 399 x 115.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC 2.1.1.2 WIDS-51xA-G41 Specifications The technical specifications for the WIDS-51xA-G41 system are listed below. WIDS-515A-G41 WIDS-517A-G41 Size 15” 17” Resolution 1024 x 768 (XGA) 1280 x 1024 (SXGA) Brightness 350 cd/m2 380 cd/m2 LCD Contrast Ratio 700:1 1000:1 Specs. Pixel Pitch (mm) 0.297 x 0.297 0.264 x 0.264 Viewing Angle (V-H) 125/140 160/170 LCD Color 16.2M 16.7M Backlight MTBF 50,000 hours 50,000 hours CPU 2.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC WIDS-515A-G41 WIDS-517A-G41 1 x RS-232/422/485 4 x RS-232 6 x USB 2.0 (two on front panel are waterproof) 2 x PS/2 for keyboard and mouse 1 x Parallel port connector 1 x VGA-out connector I/O ports 2 x LAN connectors 3 x Audio connectors (line-in, line-out and mic-in) 1 x CMOS reset button 1 x AT/ATX switch 1 x USB switch 1 x Power switch 802.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Dimensions (W x H x D) WIDS-515A-G41 WIDS-517A-G41 410 x 309 x 110.5 452 x 356 x 115 ACE-A622A-RS AC Input ATX (A Model) 220 W Input: 90 V AC~264 V AC, 50/60 Hz Output(max.): 3.3 A@14 A, 5 V@16 A, 12 V@10 A, -12 V@0.8 A Power Supply ACE-4520C-RS DC Input ATX (AD Model) 200 W Input: 24 V DC (18~36 V DC), 50/60 Hz -Output(max.): 3.3 A@12 A, 5 V@12 A, 12 V@15.4 A, -12 V@0.5 A Table 2-2: WIDS-51xA-G41 Series System Specifications 2.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC 2.2.1 PPC-5150A-G41 Dimensions The dimensions of the PPC-5150A-G41 flat panel PC are shown in Figure 2-1 below.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC 2.2.2 PPC-5170A-G41 Dimensions The dimensions of the PPC-5170A-G41 flat panel PC are shown in Figure 2-2 below.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC 2.2.3 PPC-5190A-G41 Dimensions The dimensions of the PPC-5190A-G41 flat panel PC are shown in Figure 2-3 below.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC 2.2.4 WIDS-515A-G41 Dimensions The dimensions of the WIDS-515A-G41 flat panel PC are shown below.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC 2.2.5 WIDS-517A-G41 Dimensions The dimensions of the WIDS-517A-G41 flat panel PC are shown below.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC 2.3 Graphics Support The Intel® G41 chipset has an integrated graphics engine, Intel® Graphics Media Accelerator X4500 that supports analog CRT display devices. The VGA port on the external peripheral interface connector panel connects a peripheral monitor to the PPC-51xxA-G41/WIDS-51xA-G41 system. 2.4 Memory All processors supported by the PPC-51xxA-G41/WIDS-51xA-G41 have their own internal DDR3 memory controller.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC 2.5 Storage There following storage options are available: CompactFlash® SATA hard drive 2.5.1 CompactFlash® The CompactFlash® socket supports standard CompactFlash® Type II cards. The chipset flash interface is multiplexed with an IDE interface and can be connected to an array of industry standard NAND Flash or NOR Flash devices. The CompactFlash® slot location is shown below. Figure 2-7: CompactFlash® Slot 2.5.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Figure 2-8: SATA Hard Drive Slot 2.6 Front Panel The front panel of the PPC-51xxA-G41/WIDS-51xA-G41 consists of an LCD monitor and a touch screen panel. 2.6.1 Flat Screen The PPC-51xxA-G41/WIDS-51xA-G41 comes with a TFT LCD monitor. The tough construction of the TFT monitor allows the PPC-51xxA-G41/WIDS-51xA-G41 to withstand the conditions it is likely to be exposed to during regular use.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC 78% transmission Control chipset built onto the motherboard -10oC to 50oC operating temperature 7 V maximum voltage 2.7 Power Supply The PPC-51xxA-G41/WIDS-51xA-G41 flat panel PC comes with either an ACE-A662A 220 W AC 1U, or ACE-4520C 200 W DC 1U RoHS compliant ATX power supply. The PSUs have an MTBF greater than 100,000 hours. WARNING: Under no circumstances is the PSU case to be opened.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC 3.3 V 5V 12 V -12 V 12 A 12 A 15.4 A 0.5 A Output (max) 2.8 Expansion Slots The riser card with either a PCI or PCIe x1 expansion card slot can be separately purchased and installed in the PPC-51xxA-G41/WIDS-51xA-G41. The expansion card slots add additional functionality to the PPC-51xxA-G41/WIDS-51xA-G41. Figure 2-9: Expansion Card Slot 2.9 Wireless LAN (WIDS Series Only) The WIDS-51xA series panel PC preinstalled an 802.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Figure 2-10: Wireless LAN Module (Installed by Users) The wireless module is then connected directly to the front panel PIFA antenna.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Chapter 3 3 Unpacking Page 28
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC 3.1 Anti-static Precautions WARNING! Failure to take ESD precautions during the installation of the PPC-51xxA-G41/WIDS-51xA-G41 may result in permanent damage to the PPC-51xxA-G41/WIDS-51xA-G41 and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the PPC-51xxA-G41/WIDS-51xA-G41. Dry climates are especially susceptible to ESD.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC 3.3 Package Contents NOTE: If any components listed in the checklist below are missing, do not proceed with the installation. Contact the IEI reseller or vendor the PPC-51xxA-G41/WIDS-51xA-G41 was purchased from or contact an IEI sales representative directly by sending an email to sales@iei.com.tw.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Quantity Item and Part Number 1 User manual CD and driver CD 1 Touch pen Image Table 3-1: Package List Contents Page 31
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Chapter 4 4 Installation and Configuration Page 32
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC 4.1 Installation Precautions When installing the PPC-51xxA-G41/WIDS-51xA-G41, please follow the precautions listed below: Turn power off: When installing the PPC-51xxA-G41/WIDS-51xA-G41 make sure the power is off. Failing to turn off the power may cause severe injury to the body and/or damage to the system. Certified Engineers: Only certified engineers should install and modify on-board functions. Mounting: The PPC-51xxA-G41/WIDS-51xA-G41 is a heavy device.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Removal and reinstallation of some of the components are described in Chapter 4. 4.3 Installation and Configuration Steps The following installation steps must be followed. Step 1: Unpack the PPC-51xxA-G41/WIDS-51xA-G41. Step 2: Set the jumper settings. Step 3: Install HDD, CompactFlash® and CD drive. Step 4: Mount the PPC-51xxA-G41/WIDS-51xA-G41 flat panel PC. Step 5: Connect peripheral devices to the bottom panel of the PPC-51xxA-G41/WIDS-51xA-G41.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC 4.4 Remove the Back Cover Remove all the retention screws on the back cover. Lift the cover up to remove (Figure 4-1).
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC 4.5 Jumper Settings NOTE: A jumper is a metal bridge that is used to close an electrical circuit. It consists of two metal pins and a small metal clip (often protected by a plastic cover that slides over the pins to connect them. To CLOSE/SHORT a jumper means connecting the pins of the jumper with the plastic clip and to OPEN a jumper means removing the plastic clip from a jumper. The following jumpers can be PPC-51xxA-G41/WIDS-51xA-G41.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC 4.5.2 Preconfigured Jumpers WARNING: Do not change the settings on the jumpers in described here. Doing so may disable or damage the system The following jumpers are preconfigured for the PPC-51xxA-G41/WIDS-51xA-G41. Users should no change these jumpers. Jumper Name Label Type LCD voltage selection JLCD_PWR 6-pin header Touch Screen Select JTOUCH1 4-pin header Table 4-2: Preconfigured Jumpers 4.5.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Figure 4-2: CF Card Setup Jumper Location 4.5.4 COM1 to COM5 Pin 9 Select Jumper Label: J_COM_V1, J_COM_V2, J_COM_V3, J_COM_V4 and J_COM_V5 Jumper Type: 6-pin header Jumper Settings: See Table 4-4 Jumper Location: See Figure 4-3 Four jumpers configure pin 9 on the COM1, COM2, COM3 COM4 and COM5 connectors. Pin 9 on these connectors can be set as either +5 V, +12 V or as the ring (RI) signal.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC The COM1 to COM5 Pin 9 Setting jumper locations are shown in Figure 4-3 below. Figure 4-3: COM1 to COM5 Pin 9 Setting Jumper Locations 4.5.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Figure 4-4: COM5 RS-232/422/485 Serial Port Select Jumper Location 4.5.5.1 COM 5 RS-422 and RS-485 Pinouts The pinouts for RS-422 and RS-485 operation of external serial port COM 5 are detailed below.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC 4.6 Drive Installation The drive installation process is shown in the sections below. 4.6.1 Hard Drive Installation To install a HDD, please follow the steps below: Step 1: Remove the back cover (Section 4.4). Step 2: The HDD bracket is attached to the elevated platform by four retention screws. Remove the four retention screws from the elevated platform (Figure 4-5). Figure 4-5: HDD Retention Screws Step 3: Attach the SATA connector cable to the bracket.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Figure 4-6: HDD SATA Connector Step 4: Attach the hard drive in the bracket. To do this, slide the hard drive onto the bracket until it connects with the SATA connector at the back. Fasten the four retention screws on the side. Figure 4-7: HDD Retention Screws Step 5: Install the hard drive bracket (with hard drive and SATA cable attached) into the PPC-51xxA-G41/WIDS-51xA-G41 and fasten the four hard drive bracket screws.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Figure 4-8: HDD Retention Screws 4.6.2 CompactFlash® Installation To install the CompactFlash® card, please follow the steps below: Step 1: Undo the CompactFlash® slot cover screw and remove the CompactFlash® cover plate.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Step 2: Insert the CompactFlash® card into the slot. Figure 4-10: CompactFlash® Slot Step 3: Fasten the CompactFlash® cover plate.Step 0: Figure 4-11: CompactFlash® Cover Plate 4.6.3 CD Drive Installation To install a CD drive, please follow the steps below. Step 1: Remove the back cover (Section 4.4). Step 2: Attach the CD drive adapter to the CD-ROM if it is an IDE drive (if it is a SATA drive, proceed to Step 5:).
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Step 4: Insert two retention screws and secure the adapter to the CD drive (Figure 4-12). Figure 4-12: CD Drive Adapter Installation Step 5: Undo the optical drive bracket screws and remove the optical drive bracket.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Step 6: Remove the four screws from the optical drive bracket assembly. Remove the blank drive plate.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Step 7: Install the optical drive in the same position as the previously removed blank optical drive plate. Fasten the same four screws to attach the optical drive to the bracket.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Step 8: Attach the SATA cable to the back of the optical drive and fasten the SATA cable screws. Figure 4-16: Optical Drive SATA Cable Step 9: Reinstall the optical drive bracket into the PPC-51xxA-G41/WIDS-51xA-G41 and fasten the optical bracket screws.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC 4.7 PCI Expansion Card Installation (Optional) To install a PCI expansion card, please do the following. Step 1: Remove the back panel. See Section 4.4. Step 2: Install the PCI riser card. Insert the PCI riser card into the PCI slot on the motherboard of the system. Secure the PCI riser card to the system with two retention screws. Figure 4-18: Secure the PCI Riser Card Step 3: Remove the expansion slot cover.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Figure 4-19: Expansion Slot Retention Screw Step 4: Insert the expansion card. Align the PCI expansion card edge connector with the PCI expansion slot on the PCI riser card. Gently insert the PCI card into the PCI expansion slot. Step 5: Secure the expansion card. Once the PCI card is correctly installed in the system, reinsert the previously removed retention screw to secure the card to the I/O interface panel.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC 4.8 PCIe Expansion Card Installation (Optional) To install a PCI expansion card, please do the following. Step 1: Remove the back panel. See Section 4.4. Step 2: Install the PCIe riser card. Insert the PCIe riser card into the PCI slot and PCIe x4 slot on the motherboard of the system. Secure the PCIe riser card to the system with two retention screws. Figure 4-21: Secure the PCIe Riser Card Step 3: Remove the expansion slot cover.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Figure 4-22: Expansion Slot Retention Screw Step 4: Insert the expansion card. Align the PCIe expansion card edge connector with the PCIe expansion slot on the PCIe riser card. Gently insert the PCIe card into the PCIe expansion slot. Step 5: Secure the expansion card. Once the PCIe card is correctly installed in the system, reinsert the previously removed retention screw to secure the card to the I/O interface panel.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC 4.9 AT/ATX Mode Selection AT and ATX power modes can both be used on the PPC-51xxA-G41/WIDS-51xA-G41 flat panel PC. The selection is made through an AT/ATX switch on the I/O interface panel. The switch is shown below. Figure 4-24: AT/ATX Power Switch Selection 4.10 Activating the Front USB Connectors (WIDS Series Only) A USB switch on the I/O panel of the WIDS-51xA-G41 activates the two USB connectors on the front panel.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Figure 4-25: Access the Front USB Connectors Step 2: Activate the USB connectors. To activate the USB connectors, move the USB switch to the left. Figure 4-26: USB Switch Step 3: Check the USB connector status. When the USB switches are activated, a green LED next to the connectors turns on.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Figure 4-27: Green LED 4.11 Mounting the System WARNING! When mounting the PPC-51xxA-G41/WIDS-51xA-G41 flat panel PC onto an arm, wall or into a panel, it is advisable to have more than one person help with the installation to prevent accidental damage to the panel and avoid personal injury. The methods of mounting the PPC-51xxA-G41/WIDS-51xA-G41 are: Wall mounting Panel mounting Arm mounting Rack mounting The mounting methods are fully described below. 4.11.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Step 1: Select the location on the wall for the wall-mounting bracket. Step 2: Carefully mark the locations of the four bracket screw holes on the wall. Step 3: Drill four pilot holes at the marked locations on the wall for the bracket retention screws. Step 4: Align the wall-mounting bracket screw holes with the pilot holes. Step 5: Secure the mounting-bracket to the wall by inserting the retention screws into the four pilot holes and tightening them (see Figure 3-11).
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC NOTE: In the diagram below the bracket is already installed on the wall. Figure 4-29: Mount the Chassis Step 9: Secure the panel PC with the wall-mounting kit. To do this, stick the protective cushion to the wall-mounting kit first. Then, put the wall-mounting kit on the top panel of the panel PC. Carefully mark the location of the wall-mounting kit screw holes on the wall. Drill a pilot hole at the marked location on the wall.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Figure 4-30: Secure the Chassis 4.11.2 Panel/ Mounting To mount the PPC-51xxA-G41/WIDS-51xA-G41 flat panel PC into a panel, please follow the steps below. NOTE: The maximum panel thickness should be no more than 6 mm. Step 1: Select the position on the panel to mount the PPC-51xxA-G41/WIDS-51xA-G41. Step 2: Cut out a section of the panel that corresponds to the rear panel dimensions of the PPC-51xxA-G41/WIDS-51xA-G41.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Figure 4-31: PPC-5150A-G41 Panel Cutout Dimensions Figure 4-32: PPC-5170A-G41 Panel Cutout Dimensions Page 59
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Figure 4-33: PPC-5190A-G41 Panel Cutout Dimensions Figure 4-34: WIDS-515A-G41 Panel Cutout Dimensions Page 60
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Figure 4-35: WIDS-517A-G41 Panel Cutout Dimensions Step 3: Slide the PPC-51xxA-G41/WIDS-51xA-G41 through the hole until the metal frame is flush against the panel. Step 4: Insert the panel mounting clamps into the pre-formed holes along the edges of the PPC-51xxA-G41/WIDS-51xA-G41, behind the metal frame (Figure 4-36). Refer to the mounting kit packing list for the required number of mounting clamps.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Figure 4-36: Panel Mounting Clamp Positions Step 5: Tighten the screws that pass through the panel mounting clamps until the plastic caps at the front of all the screws are firmly secured to the panel (Figure 4-37).
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC 4.11.3 Rack and Cabinet Installation To mount the PPC-51xxA-G41/WIDS-51xA-G41 into a rack/cabinet, please follow the steps below. Step 1: Secure the rack mounting bracket to two sides of the monitor using the supplied retention screws (Figure 3-17). Each bracket requires four screws. Step 2: Secure the rack mounting bracket to the rack by inserting and tightening the supplied mounting nuts and bolts (Figure 3-17).
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC PPC-51xxA-G41/WIDS-51xA-G41 flat panel PC arm mount retention screw holes are shown in Figure 3-18. Figure 4-38: Arm Mount Retention Screw Holes Step 4: Secure the PPC-51xxA-G41/WIDS-51xA-G41 to the interface pad by inserting four retention screws through the mounting arm interface pad and into the PPC-51xxA-G41/WIDS-51xA-G41 flat panel PC.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Chapter 5 5 BIOS Setup Page 65
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Page 66
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC 5.1 Introduction The BIOS is programmed onto the BIOS chip. The BIOS setup program allows changes to certain system settings. This chapter outlines the options that can be changed. 5.1.1 Starting Setup The AMI BIOS is activated when the computer is turned on. The setup program can be activated in one of two ways. 1. Press the DELETE key as soon as the system is turned on or 2. Press the DELETE key when the “Press Del to enter SETUP” message appears on the screen. 0.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Key Function F2 /F3 key Change color from total three colors. F2 to select color forward. F10 key Save all the CMOS changes, only for Main Menu Table 5-1: BIOS Navigation Keys 5.1.3 Getting Help When F1 is pressed a small help window describing the appropriate keys to use and the possible selections for the highlighted item appears. To exit the Help Window press ESC or the F1 key again. 5.1.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC 5.2 Main The Main BIOS menu (BIOS Menu 1) appears when the BIOS Setup program is entered. The Main menu gives an overview of the basic system information. Main Advanced PCIPNP BIOS SETUP UTILITY Boot Security Chipset Exit System Overview ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯ AMIBIOS Version :08.00.15 Build Date :08/04/10 ID: :B180MR10 Processor Intel(R) Pentium(R) Dual CPU Speed :1800MHz Count :1 E2160 @ 1.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC The System Overview field also has two user configurable fields: System Time [xx:xx:xx] Use the System Time option to set the system time. Manually enter the hours, minutes and seconds. System Date [xx/xx/xx] Use the System Date option to set the system date. Manually enter the day, month and year. 5.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Main Advanced PCIPNP BIOS SETUP UTILITY Boot Security Chipset Exit Advanced Settings ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯ WARNING: Setting wrong values in below sections may cause system to malfunction > > > > > > > CPU Configuration IDE Configuration SuperIO Configuration Hardware Health Configuration Power Configuration Remote Access Configuration USB Configuration Select Screen ↑ ↓ Select Item Enter Go to SubScreen F1 General Help F10 Save and Exit ESC Exit v02.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Frequency: Lists the CPU processing speed FSB Speed: Lists the FSB speed Cache L1: Lists the CPU L1 cache size Cache L2: Lists the CPU L2 cache size 5.3.2 IDE Configuration Use the IDE Configuration menu (BIOS Menu 4) to change and/or set the configuration of the IDE devices installed in the system.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Enhanced DEFAULT Configures the on-board ATA/IDE controller to be in Enhanced mode. In this mode, IDE channels and SATA channels are separated. This mode supports up to 6 storage devices. Some legacy OS do not support this mode. Configure SATA as [IDE] Use the Configure SATA as option to configure SATA devices as normal IDE devices. IDE DEFAULT Configures SATA devices as normal IDE device. RAID Configures SATA devices as normal RAID device.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC The IDE Configuration menu (BIOS Menu 4) allows changes to the configurations for the IDE devices installed in the system. If an IDE device is detected and one of the above listed four BIOS configuration options are selected, the IDE configuration options shown in Section 5.3.2.1 appear. 5.3.2.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Block Mode: Block mode boosts IDE drive performance by increasing the amount of data transferred. Only 512 bytes of data can be transferred per interrupt if block mode is not used. Block mode allows transfers of up to 64 KB per interrupt. PIO Mode: Indicates the PIO mode of the installed device. Async DMA: Indicates the highest Asynchronous DMA Mode that is supported. Ultra DMA: Indicates the highest Synchronous DMA Mode that is supported. S.M.A.R.T.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC LBA/Large Mode [Auto] Use the LBA/Large Mode option to disable or enable BIOS to auto detects LBA (Logical Block Addressing). LBA is a method of addressing data on a disk drive. In LBA mode, the maximum drive capacity is 137 GB. BIOS is prevented from using the LBA mode control on Disabled the specified channel. Auto DEFAULT BIOS auto detects the LBA mode control on the specified channel.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC 3 PIO mode 3 selected with a maximum transfer rate of 11.1 MB/s 4 PIO mode 4 selected with a maximum transfer rate of 16.6 MB/s (This setting generally works with all hard disk drives manufactured after 1999. For other disk drives, such as IDE CD-ROM drives, check the specifications of the drive.) DMA Mode [Auto] Use the DMA Mode BIOS selection to adjust the DMA mode options. Auto DEFAULT BIOS auto detects the DMA mode.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Main Advanced PCIPNP BIOS SETUP UTILITY Boot Security Chipset Super I/O Chipset ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯ Parallel Port Address [378] Parallel Port Mode [Normal] Parallel Port IRQ [IRQ7] Serial Port1 Address [3F8/IRQ4] Serial Port1 Mode [Normal] Serial Port2 Address [2F8/IRQ3] Serial Port2 Mode [Normal] Serial Port3 Address [3E8] Serial Port3 IRQ [11] Serial Port4 Address [2E8] Serial Port4 IRQ [10] Serial Port5 Address [2D0] Serial Port5 IRQ [11] Serial Port
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC The parallel port operates in the enhanced parallel EPP port mode (EPP). The EPP mode supports bi-directional communication between the system and the parallel port device and the transmission rates between the two are much faster than the Normal mode. The ECP+EPP parallel port operates in the extended capabilities port (ECP) mode.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Serial Port1 Mode [Normal] Use the Serial Port1 Mode option to select the transmitting and receiving mode for the first serial port. Normal DEFAULT Serial Port 1 mode is normal IrDA Serial Port 1 mode is IrDA ASK IR Serial Port 1 mode is ASK IR Serial Port2 Address [2F8] Use the Serial Port2 Address option to select the Serial Port 2 base address.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Serial Port 3 I/O port address is 2F8 2F8 3E8 DEFAULT Serial Port 3 I/O port address is 3E8 2E8 Serial Port 3 I/O port address is 2E8 2E0 Serial Port 3 I/O port address is 2E0 Serial Port3 IRQ [IRQ11] Use the Serial Port3 IRQ option to select the Serial Port 3 interrupt address.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Disabled No base address is assigned to Serial Port 5 3E8 Serial Port 5 I/O port address is 3E8 2E8 Serial Port 5 I/O port address is 2E8 2E0 Serial Port 5 I/O port address is 2E0 2D8 Serial Port 5 I/O port address is 2D8 2D0 DEFAULT Serial Port 5 I/O port address is 2D0 Serial Port5 IRQ [IRQ11] Use the Serial Port5 IRQ option to select the Serial Port 5 interrupt address.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC 5.3.4 Hardware Health Configuration The Hardware Health Configuration menu (BIOS Menu 7) shows the operating temperature, fan speeds and system voltages.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC PWM Manual mode The fan spins at the speed set in: Fan PWM control Temp. Limit of OFF [000] WARNING: CPU failure can result if this value is set too high The fan will turn off if the temperature falls below this value. Minimum Value: 0°C Maximum Value: 127°C Temp. Limit of Start [020] WARNING: CPU failure can result if this value is set too high When the fan is off, it will only start when the temperature exceeds this setting.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC 0 PWM 1 PWM 2 PWM 4 PWM 8 PWM 16 PWM 32 PWM 64 PWM CPU Fan PWM Control [070] This value specifies the speed of the fan. PWM Minimum Mode: 0 PWM Maximum Mode: 127 Hardware Health Monitoring The following system parameters and values are shown.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC o o 5V Dual VBAT 5.3.5 Power Configuration Use the Power Configuration menu (BIOS Menu 9) configures the Advanced Configuration and Power Interface (ACPI) and Power Management (APM) options. Main Advanced PCIPNP BIOS SETUP UTILITY Boot Security Chipset Exit > ACPI Configuration > APM Configuration ↑ ↓ Enter F1 F10 ESC Select Screen Select Item Go to SubScreen General Help Save and Exit Exit v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC 5.3.5.1 ACPI Settings Use the General ACPI Settings menu (BIOS Menu 9) to select the ACPI state when the system is suspended. Main Advanced PCIPNP BIOS SETUP UTILITY Boot Security Chipset Exit ACPI Settings ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯ Suspend mode [S1 (POS)] ↑ ↓ Enter F1 F10 ESC Select Screen Select Item Go to SubScreen General Help Save and Exit Exit v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Main Advanced PCIPNP BIOS SETUP UTILITY Boot Security Chipset APM Configuration ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯ Restore on AC Power Loss [Last State] Advanced Resume Event Controls Resume on Keyboard/Mouse Resume On Ring Resume on PCI RME# Resume on PCI Express Wake# Resume on RTC Alarm [Disabled] [Disabled] [Disabled] [Enabled] [Disabled] Exit Power Off Power On Last State ↑ ↓ Enter F1 F10 ESC Select Screen Select Item Go to SubScreen General Help Save and Ex
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Resume Wake event generated by activity on the mouse On Mouse Wake event generated by activity on the keyboard or Enabled mouse Resume on Ring [Disabled] Use the Resume on Ring BIOS option to enable activity on the RI (ring in) modem line to rouse the system from a suspend or standby state. That is, the system will be roused by an incoming call on a modem.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Disabled DEFAULT The real time clock (RTC) cannot generate a wake event If selected, the following appears with values that Enabled can be selected: RTC Alarm Date (Days) System Time After setting the alarm, the computer turns itself on from a suspend state when the alarm goes off. 5.3.6 Remote Access Configuration Use the Remote Access Configuration menu (BIOS Menu 11) to configure remote access parameters.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Disabled DEFAULT Remote access is disabled. Remote access configuration options shown below Enabled appear: Serial Port Number Serial Port Mode Redirection after BIOS POST Terminal Type These configuration options are discussed below. Serial Port Number [COM1] Use the Serial Port Number option to select the serial port used for remote access.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC 57600 8,n,1 38400 8,n,1 19200 8,n,1 09600 8,n,1 NOTE: Identical baud rate setting musts be set on the host (a management computer running a terminal software) and the slave Redirection After BIOS POST [Always] Use the Redirection After BIOS POST option to specify when console redirection should occur.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC 5.3.7 USB Configuration Use the USB Configuration menu (BIOS Menu 12) to read USB configuration information and configure the USB settings. Main Advanced PCIPNP BIOS SETUP UTILITY Boot Security Chipset Exit USB Configuration ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯ Module Version – 2.24.3-13.4 USB Devices Enabled: None USB Functions USB 2.0 Controller Legacy USB Support USB 2.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC USB 2.0 Controller [Enabled] Use the USB 2.0 Controller BIOS option to enable or disable the USB 2.0 controller Enabled DEFAULT USB 2.0 controller enabled USB 2.0 controller disabled Disabled Legacy USB Support [Enabled] Use the Legacy USB Support BIOS option to enable USB mouse and USB keyboard support.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC 5.4 PCI/PnP Use the PCI/PnP menu (BIOS Menu 13) to configure advanced PCI and PnP settings. WARNING! Setting wrong values for the BIOS selections in the PCIPnP BIOS menu may cause the system to malfunction.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Available DEFAULT The specified IRQ is available to be used by PCI/PnP devices The specified IRQ is reserved for use by Legacy ISA Reserved devices Available IRQ addresses are: IRQ3 IRQ4 IRQ5 IRQ7 IRQ9 IRQ10 IRQ 11 IRQ 14 IRQ 15 DMA Channel# [Available] Use the DMA Channel# option to assign a specific DMA channel to a particular PCI/PnP device.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Reserved Memory Size [Disabled] Use the Reserved Memory Size BIOS option to specify the amount of memory that should be reserved for legacy ISA devices. Disabled DEFAULT No memory block reserved for legacy ISA devices 16K 16 KB reserved for legacy ISA devices 32K 32 KB reserved for legacy ISA devices 64K 54 KB reserved for legacy ISA devices 5.5 Boot Use the Boot menu (BIOS Menu 14) to configure system boot options.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC 5.5.1 Boot Settings Configuration Use the Boot Settings Configuration menu (BIOS Menu 15) to configure advanced system boot options.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC AddOn ROM Display Mode [Force BIOS] Use the AddOn ROM Display Mode option to allow add-on ROM (read-only memory) messages to be displayed. Force BIOS DEFAULT The system forces third party BIOS to display during system boot. The system displays normal information during Keep Current system boot. Bootup Num-Lock [On] Use the Bootup Num-Lock BIOS option to specify if the number lock setting must be modified during boot up.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC 5.6 Security Use the Security menu (BIOS Menu 16) to set system and user passwords. Main Advanced PCIPNP BIOS SETUP UTILITY Boot Security Chipset Exit Security Settings ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯ Supervisor Password :Not Installed User Password :Not Installed Change Supervisor Password Change User Password Select Screen ↑ ↓ Select Item Enter Go to SubScreen F1 General Help F10 Save and Exit ESC Exit v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC 5.7 Chipset Use the Chipset menu (BIOS Menu 17) to access the Northbridge and Southbridge configuration menus WARNING! Setting the wrong values for the Chipset BIOS selections in the Chipset BIOS menu may cause the system to malfunction. Main Advanced PCIPNP BIOS SETUP UTILITY Boot Security Chipset Exit Advanced Chipset Settings ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯ WARNING: Setting wrong values in below section may cause system to malfunction.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC 5.7.1 North Bridge Configuration Use the North Bridge Chipset Configuration menu (BIOS Menu 18) to configure the Northbridge chipset.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC 15 MB–16 MB Between 15 MB and 16 MB of memory is reserved for ISA expansion cards Initiate Graphic Adapter Use the Initiate Graphic Adapter option to select the graphics controller used as the primary boot device. Select either an integrated graphics controller (IGD) or a combination of PCI graphics controller, a PCI express (PEG) controller or an IGD.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Main Advanced PCIPNP BIOS SETUP UTILITY Boot Security Chipset Exit Video Function Configuration ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯ Boot Display Device [Auto] Flat Panel Type [1024x768 18bits] Select Screen ↑ ↓ Select Item Enter Go to SubScreen F1 General Help F10 Save and Exit ESC Exit v02.61 ©Copyright 1985-2006, American Megatrends, Inc. BIOS Menu 19: South Bridge Chipset Configuration 5.7.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Audio Controller [Auto] Use the Audio Controller option to enable the audio controller. Auto DEFAULT Audio controller automatically detected and enabled Audio controller disabled Disabled Spread Spectrum [Disabled] Use the Spread Spectrum option to reduce the EMI. Excess EMI is generated when the system clock generator pulses have extreme values. Spreading the pulse spectrum modulates changes in the extreme values from spikes to flat curves, thus reducing the EMI.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Save Changes and Exit Use the Save Changes and Exit option to save the changes made to the BIOS options and to exit the BIOS configuration setup program. Discard Changes and Exit Use the Discard Changes and Exit option to exit the BIOS configuration setup program without saving the changes made to the system. Discard Changes Use the Discard Changes option to discard the changes and remain in the BIOS configuration setup program.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Chapter 6 6 System Maintenance Page 107
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC 6.1 System Maintenance Introduction The following system components may require maintenance. Motherboard DIMM module PSU module Cooling fans If these components fail, they must be replaced. Please contact the system reseller or vendor to purchase replacement parts. Replacement instructions for the above listed components are described below. 6.2 Motherboard Replacement A user cannot replace a motherboard.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC WARNING! Please take antistatic precautions when working with the internal components. The interior of the PPC-51xxA-G41/WIDS-51xA-G41 contains very sensitive electronic components. These components are easily damaged by electrostatic discharge (ESD). Before working with the internal components, make sure all anti-static precautions described earlier have been observed. To access the panel PC internal components, the back cover must be removed.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Figure 6-1: DIMM Socket Clip Locations Step 3: Push the new DIMM module until it engages and the white plastic end clips click into place. Make sure the end clips are fully secured after installation. Step 0: 6.5 Elevated Platform Removal The elevated platform supports the optical drive and the hard drive. It is not necessary to remove the optical drive bracket or hard drive bracket to remove the elevated platform.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Step 2: Unfasten the elevated platform screws on the side panel (Figure 6-3). Figure 6-3: Side Panel Elevated Platform Screws Step 3: Unfasten the elevated platform screws on the bottom panel (Figure 6-4).
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Step 4: Unfasten the internal elevated platform screws (Figure 6-5). Figure 6-5: Internal Elevated Platform Screws Step 5: Slide the elevated platform out of the chassis. Step 0: 6.6 PSU Module Replacement Please read the warnings at the beginning of Section 4.3 before attempting to access any PPC-51xxA-G41/WIDS-51xA-G41 internal components. If the PSU module has been damaged it must be replaced. To replace the PSU module, please follow the steps below. 6.6.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Step 3: Disconnect all PSU connections including those to the motherboard (Figure 6-6) and any disk drives. Figure 6-6: PSU Power Cables Step 4: Unfasten the screws on the inside panel (Figure 6-7).
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Step 5: Remove the retention screws that connect the PSU bracket to the chassis (Figure 6-8). Figure 6-8: PSU Rear Panel Screws Step 6: Remove the retention screws that connect the PSU to the PSU bracket.Step 0: 6.6.2 Install the New PSU Installation is done in the reverse order to removal. To install a new PSU module, please follow the steps below. Step 1: Attach the PSU bracket to the PSU module with the previously removed retention screws.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC 6.7 System Cooling Fan Replacement If the system cooling fans have been damaged, they must be replaced. To replace the system cooling fans, please follow the steps below. 6.7.1 Remove the Old System Cooling Fans Step 1: Remove the back cover (Section 4.4). Step 2: Detach and remove the elevated platform (Section 6.5). Step 3: Disconnect the system cooling fans from the motherboard (Figure 6-9).
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Step 4: Remove the system cooling fans retention screws from the left panel (Figure 6-10). Figure 6-10: System Cooling Fans Left Panel Retention Screws Step 5: Remove the system cooling fans from the chassis. Step 0: 6.7.2 Install the New System Cooling Fans To install the new system cooling fans, please follow the steps below. Step 1: Insert the system cooling fans into the chassis and attach to the left panel with the previously removed retention screws.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Appendix A A BIOS Options Page 117
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Below is a list of BIOS configuration options in the BIOS chapter. System Overview .................................................................................................................69 System Time [xx:xx:xx] .......................................................................................................70 System Date [xx/xx/xx] ........................................................................................................
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Start PWM [070]....................................................................................................................84 Slope PWM [1 PWM] ............................................................................................................84 CPU Fan PWM Control [070] ...............................................................................................85 Hardware Health Monitoring .............................................................
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Initiate Graphic Adapter ................................................................................................... 103 IGD Graphics Mode Select [Enable, 32 MB] ................................................................... 103 Audio Controller [Auto] .................................................................................................... 105 Spread Spectrum [Disabled]..............................................................................
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Appendix B B Terminology Page 121
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC AC ’97 Audio Codec 97 (AC’97) refers to a codec standard developed by Intel® in 1997. ACPI Advanced Configuration and Power Interface (ACPI) is an OS-directed configuration, power management, and thermal management interface. AHCI Advanced Host Controller Interface (AHCI) is a SATA Host controller register-level interface. ATA The Advanced Technology Attachment (ATA) interface connects storage devices including hard disks and CD-ROM drives to a computer.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC DMA Direct Memory Access (DMA) enables some peripheral devices to bypass the system processor and communicate directly with the system memory. DIMM Dual Inline Memory Modules are a type of RAM that offer a 64-bit data bus and have separate electrical contacts on each side of the module. DIO The digital inputs and digital outputs are general control signals that control the on/off circuit of external devices or TTL devices.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC LCD Liquid crystal display (LCD) is a flat, low-power display device that consists of two polarizing plates with a liquid crystal panel in between. LVDS Low-voltage differential signaling (LVDS) is a dual-wire, high-speed differential electrical signaling system commonly used to connect LCD displays to a computer. POST The Power-on Self Test (POST) is the pre-boot actions the system performs when the system is turned-on.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Appendix C C Digital I/O Interface Page 125
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC C.1 Introduction The DIO connector on the PPC-51xxA-G41/WIDS-51xA-G41 is interfaced to GPIO ports on the Super I/O chipset. The DIO has both 4-bit digital inputs and 4-bit digital outputs. The digital inputs and digital outputs are generally control signals that control the on/off circuit of external devices or TTL devices. Data can be read or written to the selected address to enable the DIO functions.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC C.3 Assembly Language Samples C.3.1 Enable the DIO Input Function The BIOS interrupt call INT 15H controls the digital I/O. An assembly program to enable digital I/O input functions is listed below. MOV AX, 6F08H Sets the digital port as input INT 15H Initiates the INT 15H BIOS call C.3.2 Enable the DIO Output Function The BIOS interrupt call INT 15H controls the digital I/O. An assembly program to enable digital I/O output functions is listed below.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Appendix D D Watchdog Timer Page 128
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC NOTE: The following discussion applies to DOS environment. IEI support is contacted or the IEI website visited for specific drivers for more sophisticated operating systems, e.g., Windows and Linux. The Watchdog Timer is provided to ensure that standalone systems can always recover from catastrophic conditions that cause the CPU to crash. This condition may have occurred by external EMIs or a software bug.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC NOTE: When exiting a program it is necessary to disable the Watchdog Timer, otherwise the system resets.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Appendix E E Address Mapping Page 131
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC E.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC E.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Figure E-3: Input/Output (IO) (2 of 2) Page 134
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC E.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC E.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Appendix F F Hazardous Materials Disclosure Page 137
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC F.1 Hazardous Materials Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without Mercury The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only.
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC Part Name Toxic or Hazardous Substances and Elements Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) Chromium Biphenyls Diphenyl (CR(VI)) (PBB) Ethers (PBDE) Housing X O O O O X Display X O O O O X Printed Circuit X O O O O X X O O O O O X O O O O X Fan Assembly X O O O O X Power Supply X O O O O X O O O O O O Board Metal Fasteners Cable Assembly Assemblies Battery O: This
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC 此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符 合中国 RoHS 标准规定的限量要求。 本产品上会附有”环境友好使用期限”的标签，此期限是估算这些物质”不会有泄漏或突变”的 年限。本产品可能包含有较短的环境友好使用期限的可替换元件，像是电池或灯管，这些元 件将会单独标示出来。 部件名称 有毒有害物质或元素 铅 汞 镉 六价铬 多溴联苯 多溴二苯 (Pb) (Hg) (Cd) (CR(VI)) (PBB) 醚 (PBDE) 壳体 X O O O O X 显示 X O O O O X 印刷电路板 X O O O O X 金属螺帽 X O O O O O 电缆组装 X O O O O X 风扇组装 X O O O O X 电力供应组装 X O O O O X 电池 O O O O O O O: 表示该有毒有害物质在该部件所有物质材料中的含量均在 SJ/T11363-2
