Manual

PPC-5xxx-9455 Panel PC
Page 60
Figure 4-17: Secure the Chassis
4.7.2 Panel/ Mounting
To mount the PPC-5xxx-9455 flat panel PC into a panel, please follow the steps below.
NOTE:
The maximum panel thickness should be no more than 6 mm.
Step 1: Select the position on the panel to mount the PPC-5xxx-9455.
Step 2: Cut out a section of the panel that corresponds to the rear panel dimensions of
the PPC-5xxx-9455. The recommended cutout sizes are shown below
(
Figure 4-18, Figure 4-19 and Figure 4-20).