Manual

PPC-5xxx-9455 Panel PC
Page 149
Step 4: Unfasten the internal elevated platform screws (Figure 7-5).
Figure 7-5: Internal Elevated Platform Screws
Step 5: Slide the elevated platform out of the chassis. Step 0:
7.6 PSU Module Replacement
Please read the warnings at the beginning of Section 4.3 before attempting to access any
PPC-5xxx-9455 internal components.
If the PSU module has been damaged it must be replaced. To replace the PSU module,
please follow the steps below.
7.6.1 Remove the Old PSU
Step 1: Remove the back cover (Section 4.4).
Step 2: Detach and remove the elevated platform (Section
7.5).