Owner manual

ManualsBrandsIEI Integration ManualsComputersPPC-5xxx-9455 v1.00

100

Table Of Contents

Revision
Copyright
Manual Conventions
Packing List
Table of Contents
List of Figures
List of Tables
BIOS Menus
1 Introduction
- 1.1 General Overview
- 1.2 External Overview
- 1.3 Internal Overview
2 Specifications
- 2.1 Introduction
- 2.2 Dimensions
- 2.3 Motherboard
- 2.4 CPU Support
- 2.5 System Chipsets
  - 2.5.1 Intel® 945G Northbridge Chipset
  - 2.5.2 ICH7 Southbridge Chipset
- 2.6 Graphics Support
  - Analog CRT Support
  - 2.6.2 LVDS Support
- 2.7 Memory
- 2.8 Storage
  - CompactFlash®
  - 2.8.2 SATA Hard Drive
- 2.9 Expansion Slots
- 2.10 External Device Connectors
- 2.11 Gigabit Ethernet
- 2.12 Front Panel
  - 2.12.1 Flat Screen
  - 2.12.2 Touch Screen
- 2.13 OEM Options
3 Unpacking
- 3.1 Anti-static Precautions
- 3.2 Unpacking Precautions
- 3.3 Package Contents
4 Installation and Configuration
- 4.1 Installation Precautions
- 4.2 Preinstalled Components
- 4.3 Installation and Configuration Steps
- 4.4 Remove the Back Cover
- 4.5 Jumper Settings
- 4.6 Drive Installation
- 4.7 Mounting the System
- 4.8 External Peripheral Interface Connectors
5 BIOS Setup
- 5.1 Introduction
- 5.2 Main
- 5.3 Advanced
- 5.4 PCI/PnP
- 5.5 Boot
- 5.6 Security
- 5.7 Chipset
  - 5.7.1 Northbridge Configuration
  - 5.7.2 Southbridge Configuration
- 5.8 Exit
6 Software Installation
- 6.1 Available Software Drivers
- 6.2 Chipset Driver
- 6.3 Graphics Driver
- 6.4 Gigabit Ethernet Driver Installation
- 6.5 Audio Driver
  - 6.5.1 BIOS Setup
  - 6.5.2 Driver Installation
- 6.6 Touch Panel Driver
7 System Maintenance
- 7.1 System Maintenance Introduction
- 7.2 Motherboard Replacement
- 7.3 Back Cover Removal
- 7.4 DIMM Replacement
- 7.5 Elevated Platform Removal
- 7.6 PSU Module Replacement
  - 7.6.1 Remove the Old PSU
  - 7.6.2 Install the New PSU
- 7.7 System Cooling Fan Replacement
  - 7.7.1 Remove the Old System Cooling Fans
  - 7.7.2 Install the New System Cooling Fans
A BIOS Options
B Terminology
C Digital I/O Interface
- C.1 Introduction
- C.2 DIO Connector Pinouts
- C.3 Assembly Language Samples
  - C.3.1 Enable the DIO Input Function
  - C.3.2 Enable the DIO Output Function
D Watchdog Timer
E Address Mapping
- E.1 Direct Memory Access (DMA)
- E.2 Input/Output (IO)
- E.3 Interrupt Request (IRQ)
- E.4 Memory
F Compatibility
- F.1 Compatible Operating Systems
- F.2 Compatible Processors
- F.3 Compatible Memory Modules
G Hazardous Materials Disclosure
- G.1 Hazardous Materials Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without Mercury
Index

PPC-5xxx-9455 Panel PC

Page 75

 Primary IDE Master

 Primary IDE Slave

The IDE Configuration menu (

BIOS Menu 4) allows changes to the configurations for the

IDE devices installed in the system. If an IDE device is detected, and one of the above

listed four BIOS configuration options are selected, the IDE configuration options shown in

Section

5.3.2.1 appear.

5.3.2.1 IDE Master, IDE Slave

Use the IDE Master and IDE Slave configuration menu to view both primary and

secondary IDE device details and configure the IDE devices connected to the system.

BIOS Menu 5: IDE Master and IDE Slave Configuration

 Auto-Detected Drive Parameters

The “grayed-out” items in the left frame are IDE disk drive parameters automatically

detected from the firmware of the selected IDE disk drive. The drive parameters are listed

as follows: