Owner manual

ManualsBrandsIEI Integration ManualsComputersPPC-5xxx-9455 v1.00

Table Of Contents

Revision
Copyright
Manual Conventions
Packing List
Table of Contents
List of Figures
List of Tables
BIOS Menus
1 Introduction
- 1.1 General Overview
- 1.2 External Overview
- 1.3 Internal Overview
2 Specifications
- 2.1 Introduction
- 2.2 Dimensions
- 2.3 Motherboard
- 2.4 CPU Support
- 2.5 System Chipsets
  - 2.5.1 Intel® 945G Northbridge Chipset
  - 2.5.2 ICH7 Southbridge Chipset
- 2.6 Graphics Support
  - Analog CRT Support
  - 2.6.2 LVDS Support
- 2.7 Memory
- 2.8 Storage
  - CompactFlash®
  - 2.8.2 SATA Hard Drive
- 2.9 Expansion Slots
- 2.10 External Device Connectors
- 2.11 Gigabit Ethernet
- 2.12 Front Panel
  - 2.12.1 Flat Screen
  - 2.12.2 Touch Screen
- 2.13 OEM Options
3 Unpacking
- 3.1 Anti-static Precautions
- 3.2 Unpacking Precautions
- 3.3 Package Contents
4 Installation and Configuration
- 4.1 Installation Precautions
- 4.2 Preinstalled Components
- 4.3 Installation and Configuration Steps
- 4.4 Remove the Back Cover
- 4.5 Jumper Settings
- 4.6 Drive Installation
- 4.7 Mounting the System
- 4.8 External Peripheral Interface Connectors
5 BIOS Setup
- 5.1 Introduction
- 5.2 Main
- 5.3 Advanced
- 5.4 PCI/PnP
- 5.5 Boot
- 5.6 Security
- 5.7 Chipset
  - 5.7.1 Northbridge Configuration
  - 5.7.2 Southbridge Configuration
- 5.8 Exit
6 Software Installation
- 6.1 Available Software Drivers
- 6.2 Chipset Driver
- 6.3 Graphics Driver
- 6.4 Gigabit Ethernet Driver Installation
- 6.5 Audio Driver
  - 6.5.1 BIOS Setup
  - 6.5.2 Driver Installation
- 6.6 Touch Panel Driver
7 System Maintenance
- 7.1 System Maintenance Introduction
- 7.2 Motherboard Replacement
- 7.3 Back Cover Removal
- 7.4 DIMM Replacement
- 7.5 Elevated Platform Removal
- 7.6 PSU Module Replacement
  - 7.6.1 Remove the Old PSU
  - 7.6.2 Install the New PSU
- 7.7 System Cooling Fan Replacement
  - 7.7.1 Remove the Old System Cooling Fans
  - 7.7.2 Install the New System Cooling Fans
A BIOS Options
B Terminology
C Digital I/O Interface
- C.1 Introduction
- C.2 DIO Connector Pinouts
- C.3 Assembly Language Samples
  - C.3.1 Enable the DIO Input Function
  - C.3.2 Enable the DIO Output Function
D Watchdog Timer
E Address Mapping
- E.1 Direct Memory Access (DMA)
- E.2 Input/Output (IO)
- E.3 Interrupt Request (IRQ)
- E.4 Memory
F Compatibility
- F.1 Compatible Operating Systems
- F.2 Compatible Processors
- F.3 Compatible Memory Modules
G Hazardous Materials Disclosure
- G.1 Hazardous Materials Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without Mercury
Index

PPC-5xxx-9455 Panel PC

Page 57

Figure 4-16: Mount the Chassis

Step 9: Secure the panel PC with the wall-mounting kit. To do this, stick the protective

cushion to the wall-mounting kit first. Then, put the wall-mounting kit on the top

panel of the panel PC. Carefully mark the location of the wall-mounting kit screw

holes on the wall. Drill a pilot hole at the marked location on the wall. Secure the

wall-mounting kit to the wall by inserting a retention screw into the pilot hole on

the wall (

Figure 4-17). This step is to avoid the panel PC being pushed apart

from the wall-mounting bracket accidentally. Step 0: