Owner manual
Table Of Contents
- Revision
- Copyright
- Manual Conventions
- Packing List
- Table of Contents
- List of Figures
- List of Tables
- BIOS Menus
- 1 Introduction
- 2 Specifications
- 3 Unpacking
- 4 Installation and Configuration
- 4.1 Installation Precautions
- 4.2 Preinstalled Components
- 4.3 Installation and Configuration Steps
- 4.4 Remove the Back Cover
- 4.5 Jumper Settings
- 4.6 Drive Installation
- 4.7 Mounting the System
- 4.8 External Peripheral Interface Connectors
- 5 BIOS Setup
- 5.1 Introduction
- 5.2 Main
- 5.3 Advanced
- 5.4 PCI/PnP
- 5.5 Boot
- 5.6 Security
- 5.7 Chipset
- 5.8 Exit
- 6 Software Installation
- 7 System Maintenance
- A BIOS Options
- B Terminology
- C Digital I/O Interface
- D Watchdog Timer
- E Address Mapping
- F Compatibility
- G Hazardous Materials Disclosure
- Index

PPC-5xxx-9455 Panel PC
Page 18
2.1.4.2 ACE-4520C Power Supply
Specifications for the ACE-4520C PSU module are shown in (Table 2-7).
Specification Rating
INPUT Voltage 18 VDC ~ 36 VDC Full Range
Input Current 15A
Inrush Current 100A
OUTPUT Voltage (V) +3.3 V +5 V +12 V -12 V 5 VSB
Min. Load (A) 0.0A 1.0A 0.5A 0.0A 0.0A
Max. Load (A) 12A 12A 15.4A 0.5A 2.0A
Ripple and Noise (mV) 50mV 50mV 120mV 120mV 50mV
+3.3 V & +5 V≦80 W; +3.3 V & +5 V & +12 V≦184 W
GENERAL Watt 200 W
PFC Active
Hold-up time 20ms minimum
Efficiency 78%
MTBF 100,000hrs
Temperature 0~50°C (Operating); -20~80°C (Storage)
Humidity 5 –95% RH, Non-condensing (Operating & Storage)
Dimension 150 mm (W) x 81.5 mm (H) x 40.3 mm (D)
Table 2-7: ACE-4520C Power Supply Specifications
2.2 Dimensions
The dimensions of the PPC-5xxx-9455 are shown in the sections below.