Owner manual

ManualsBrandsIEI Integration ManualsComputersPPC-5xxx-9455 v1.00

101

102

103

104

105

106

107

108

109

110

Table Of Contents

Revision
Copyright
Manual Conventions
Packing List
Table of Contents
List of Figures
List of Tables
BIOS Menus
1 Introduction
- 1.1 General Overview
- 1.2 External Overview
- 1.3 Internal Overview
2 Specifications
- 2.1 Introduction
- 2.2 Dimensions
- 2.3 Motherboard
- 2.4 CPU Support
- 2.5 System Chipsets
  - 2.5.1 Intel® 945G Northbridge Chipset
  - 2.5.2 ICH7 Southbridge Chipset
- 2.6 Graphics Support
  - Analog CRT Support
  - 2.6.2 LVDS Support
- 2.7 Memory
- 2.8 Storage
  - CompactFlash®
  - 2.8.2 SATA Hard Drive
- 2.9 Expansion Slots
- 2.10 External Device Connectors
- 2.11 Gigabit Ethernet
- 2.12 Front Panel
  - 2.12.1 Flat Screen
  - 2.12.2 Touch Screen
- 2.13 OEM Options
3 Unpacking
- 3.1 Anti-static Precautions
- 3.2 Unpacking Precautions
- 3.3 Package Contents
4 Installation and Configuration
- 4.1 Installation Precautions
- 4.2 Preinstalled Components
- 4.3 Installation and Configuration Steps
- 4.4 Remove the Back Cover
- 4.5 Jumper Settings
- 4.6 Drive Installation
- 4.7 Mounting the System
- 4.8 External Peripheral Interface Connectors
5 BIOS Setup
- 5.1 Introduction
- 5.2 Main
- 5.3 Advanced
- 5.4 PCI/PnP
- 5.5 Boot
- 5.6 Security
- 5.7 Chipset
  - 5.7.1 Northbridge Configuration
  - 5.7.2 Southbridge Configuration
- 5.8 Exit
6 Software Installation
- 6.1 Available Software Drivers
- 6.2 Chipset Driver
- 6.3 Graphics Driver
- 6.4 Gigabit Ethernet Driver Installation
- 6.5 Audio Driver
  - 6.5.1 BIOS Setup
  - 6.5.2 Driver Installation
- 6.6 Touch Panel Driver
7 System Maintenance
- 7.1 System Maintenance Introduction
- 7.2 Motherboard Replacement
- 7.3 Back Cover Removal
- 7.4 DIMM Replacement
- 7.5 Elevated Platform Removal
- 7.6 PSU Module Replacement
  - 7.6.1 Remove the Old PSU
  - 7.6.2 Install the New PSU
- 7.7 System Cooling Fan Replacement
  - 7.7.1 Remove the Old System Cooling Fans
  - 7.7.2 Install the New System Cooling Fans
A BIOS Options
B Terminology
C Digital I/O Interface
- C.1 Introduction
- C.2 DIO Connector Pinouts
- C.3 Assembly Language Samples
  - C.3.1 Enable the DIO Input Function
  - C.3.2 Enable the DIO Output Function
D Watchdog Timer
E Address Mapping
- E.1 Direct Memory Access (DMA)
- E.2 Input/Output (IO)
- E.3 Interrupt Request (IRQ)
- E.4 Memory
F Compatibility
- F.1 Compatible Operating Systems
- F.2 Compatible Processors
- F.3 Compatible Memory Modules
G Hazardous Materials Disclosure
- G.1 Hazardous Materials Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without Mercury
Index

PPC-5xxx-9455 Panel PC

Page 87

 CPU FAN 1 Mode Setting [Full On Mode]

Use the CPU FAN 1 Mode Setting option to configure the CPU fan.



Full On Mode DEFAULT

Fan is on all the time

 FAN x Mode Setting [Automatic Mode]

Use the FAN x Mode Setting option to configure the second fan.



Full On Mode

Fan is on all the time



Automatic mode DEFAULT

Fan is off when the temperature is low

enough. Parameters must be set by the

user.



PWM Manually mode

Pulse width modulation set manually

When the FAN x Mode Setting option is in the Automatic Mode, the following

parameters can be set.

 Temperature Limit of OFF

 Temperature Limit of Start

 Temperature Limit of Full

 Fan Start PWM

 Slope PWM

When the CPU FAN Mode Setting option is in the PWM Manual Mode, the following

parameters can be set.

 CPU Fan PWM control

 Temperature Limit of OFF [025]

WARNING:

Setting this value too high may cause the fan to stop when the CPU is

at a high temperature and therefore cause the system to be damaged.