User Manual

PPC-51xxA-H61 Panel PC
Page 58
Step 1: Located the USB connectors. The locations of the USB connectors are shown
in Chapter 1.
Step 2: Align the connectors. Align the USB device connector with one of the
connectors on the bottom panel. See
Figure 3-39.
Figure 3-39: USB Device Connection
Step 3: Insert the device connector. Once aligned, gently insert the USB device
connector into the onboard connector.
3.13.7 USB 3.0 Connectors
The USB 3.0 ports are for attaching USB 3.0 peripheral devices to the system. The
pinouts of the USB 3.0 port is shown below.
Pin Description Pin Description
1 USB3_PWR1 10 USB3_PWR2
2 USB2P0_DM1 11 USB2P0_DM2
3 USB2P0_DP1 12 USB2P0_DP2
4 GND 13 GND
5 USB3P0_RXDN1 14 USB3P0_RXDN2