User Manual

PPC-51xxA-H61 Panel PC
Page 48
Step 3: Slide the PPC-51xxA-H61 through the hole until the metal frame is flush against
the panel.
Step 4: Insert the panel mounting clamps into the pre-formed holes along the edges of
the PPC-51xxA-H61, behind the aluminum frame (
7Figure 3-28). Refer to the
mounting kit packing list for the required number of mounting clamps.
Figure 3-28: Panel Mounting Clamp Positions
Step 5: Tighten the screws that pass through the panel mounting clamps until the plastic
caps at the front of all the screws are firmly secured to the panel (
7Figure 3-29).