User Manual

PPC-51xxA-H61 Panel PC
Page 46
Figure 3-24: Secure the Chassis
3.11.2 Panel Mounting
To mount the PPC-51xxA-H61 panel PC into a panel, please follow the steps below.
NOTE:
The maximum panel thickness should be no more than 6 mm.
Step 1: Select the position on the panel to mount the PPC-51xxA-H61.
Step 2: Cut out a section of the panel that corresponds to the rear panel dimensions of
the PPC-51xxA-H61. The recommended cutout sizes are shown below
(
7Figure 3-25, 7Figure 3-26 and 7Figure 3-27).