User Manual

PPC-51xxA-H61 Panel PC
Page 27
3.6.2 Preconfigured Jumpers
WARNING:
Do not change the settings on the jumpers in described here. Doing so
may disable or damage the system
The following jumpers are preconfigured for the PPC-51xxA-H61. Users should not
change these jumpers.
Jumper Name Label Type
CF card power selection JP1 3-pin header
Inverter brightness voltage
selection
J_ADJ1 3-pin header
LCD power selection JLCD_PWR1 6-pin header
Panel type and resolution
selection
JLCD_SET1 8-pin header
Touchscreen selection JTOUCH1 4-pin header
USB1~USB4 power selection USBAB_PWR1,
USB01_PWR1,
USB23_PWR1,
USB45_PWR1
3-pin header
Table 3-2: Preconfigured Jumpers
3.6.3 COM1 to COM5 Pin 9 Setting Jumpers
Jumper Label: J_COM_V1, J_COM_V2, J_COM_V3, J_COM_V4 and
J_COM_V5
Jumper Type:
6-pin header
Jumper Settings:
See
7Table 3-3
Jumper Location:
See
7Figure 3-2