User Manual

PPC-51xxA-H61 Panel PC
Page 119
8 USB3P0_TXDN1 17 USB3P0_TXDN2
9 USB3P0_TXDP1 18 USB3P0_TXDP2
Table 6-28: USB 3.0 Connectors (USB_CON1) Pinouts
6.3.6 VGA Connector (VGA1)
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 RED 9 5V
2 GREEN 10 GROUND
3 BLUE 11 NC
4 NC 12 DDCDAT
5 GROUND 13 HSYNC
6 GROUND 14 VSYNC
7 GROUND 15 DDCCLK
8 GROUND
Table 6-29: VGA Connector (VGA1) Pinouts
6.4 Preconfigured Jumper Settings
The following jumpers are preconfigured for the PPC-51xxA-H61. Users should not
change these jumpers (
78Table 6-30). It is only for reference.
Jumper Name Label Type
CF card power selection JP1 3-pin header
CPU fan type selection JCPUFAN1 3-pin header
Inverter brightness voltage
selection
J_ADJ1 3-pin header
LCD power selection JLCD_PWR1 6-pin header
Panel type and resolution selection JLCD_SET1 8-pin header
Pull high/low selection (for
RS-422/485 only)
UART_SEL1 8-pin header