Instruction Manual

PPC-5152-D525 Falt-bezel Panel PC
Page 53
Step 1: Locate the USB connectors. The locations of the USB connectors are shown in
6Figure 1-4.
Step 2: Align the connectors. Align the USB device connector with one of the connectors.
See
6Figure 3-39.
Figure 3-39: USB Device Connection
Step 3: Insert the device connector. Once aligned, gently insert the USB device
connector into the on-board connector.
3.11.11 VGA Connector
CN Label: VGA
CN Type:
15-pin Female
CN Location:
See
6Figure 1-4
CN Pinouts:
See
6Figure 3-40 and 6Table 3-10
The VGA connector connects to a monitor that accepts VGA video input. The pinouts of
the VGA connector is shown below.