Instruction Manual

PPC-5152-D525 Falt-bezel Panel PC
Page 51
Figure 3-38: RS-422/485 Serial Port (DB-9)
Pin RS-422 RS-485
1 RX+ --
2 RX- --
3 TX+ DATA+
4 TX- DATA-
5 -- --
6 -- --
7 -- --
8 -- --
9 -- --
Table 3-7: RS-422/485 Serial Port Pinouts
3.11.8 SFP Fiber Connectors
The PPC-5152-D525 has two SFP fiber connectors. The locations of the connectors are
shown in
6Figure 1-4. To install an SFP module, refer to Section 63.6.
3.11.9 USB 2.0 Connectors
CN Label: USB2.0
CN Type:
USB 2.0 port
CN Location:
See
6Figure 1-4
CN Pinouts:
See
6Table 3-8
The USB 2.0 ports are for attaching USB 2.0 peripheral devices to the system. The
pinouts of the USB 2.0 port is shown below.