Instruction Manual

PPC-5152-D525 Falt-bezel Panel PC
Page 31
Figure 3-13: Expansion Slot Retention Screw
Step 3: Insert the expansion card. Align the PCIe expansion card edge connector with
the PCIe expansion slot on the PCIe riser card. Gently insert the PCIe card into
the PCIe expansion slot.
Step 4: Secure the expansion card. Once the PCIe card is correctly installed in the
system, reinsert the previously removed retention screw to secure the card to
the I/O interface panel.Step 0:
Figure 3-14: Install PCIe Card