Instruction Manual

PPC-5152-D525 Falt-bezel Panel PC
Page 30
3.9 PCIe Expansion Card Installation (Optional)
CAUTION:
The maximum dimensions of the expansion card should be 200 mm in
length, 100 mm in width and 20 mm in height. The width of the I/O panel
should be no more than 73.8 mm. The diagram below shows the
dimensions of the expansion slot on the bottom panel of the
PPC-5152-D525.
To install a PCIe expansion card, please do the following.
Step 1: Remove the rear cover. See Section
63.7 Step 1.
Step 2: Remove the expansion slot cover. The expansion slot cover is secured to the
system with a single retention screw. Remove the screw.