Instruction Manual

PPC-5152-D525 Falt-bezel Panel PC
Page 26
Figure 3-8: HDD Bracket Retention Screws
Step 3: Lift the HDD bracket out of the PPC-5152-D525.
Step 4: Remove the SATA connector from the bracket by removing the two retention
screws on the bottom of the bracket.
Step 5: Connect the HDD to the SATA connector first, then place the HDD onto the
bracket. Secure the SATA connector with the HDD bracket by two previously
removed screws.
Step 6: Secure the HDD with the HDD bracket by four retention screws (
6Figure 3-9).
Figure 3-9: HDD Installation