Manual

PPC-37xxA-N26 Panel PC
Page 71
Î USB transfer time-out [20 sec]
Use the USB transfer time-out option to set the time-out value for Control, Bulk and
Interrupt transfers.
 1 sec
 5 sec
 10 sec
 20 sec D
EFAULT
Î Device reset time-out [20 sec]
Use the Device reset time-out option to set the number of seconds that the Power-On
Self Test will wait for a USB mass storage device to start.
 10 sec
 20 sec D
EFAULT
 30 sec
 40 sec
Î Device power-up delay [Auto]
Use the Device power-up delay BIOS option to set the maximum time a USB device will
take before it properly reports itself to the Host Controller.
Î
Auto DEFAULT
Uses the default values.
For a Root port: 100 ms delay.
For a Hub port: Uses the delay from Hub descriptor
Î
Manual
Allows setting the delay ranging from 1 to 40
seconds.