Manual

PPC-37xxA-N26 Panel PC
Page 40
Figure 3-27: PPC-3708A-N26 Panel Cutout Dimensions
Figure 3-28: PPC-3710A-N26 Panel Cutout Dimensions
Step 3: Slide the panel PC through the hole until the aluminum frame is flush against the
panel.
Step 4: Insert the panel mounting clamps into the pre-formed holes along the edges of
the panel PC, behind the aluminum frame (
Figure 3-29). There are a total of 8
panel mounting clamps for PPC-3708A-N26 and 10 clamps for
PPC-3710A-N26.