Manual

PPC-37xxA-N26 Panel PC
Page 39
Figure 3-26: Secure the Chassis
3.10.2 Panel Mounting
3.10.2.1 PPC-3708A-N26 and PPC-3710A-N26
To mount the PPC-3708A-N26 or PPC-3710A-N26 panel PC into a panel, please follow
the steps below.
Step 1: Select the position on the panel to mount the PPC-37xxA-N26.
Step 2: Cut out a section of the panel that corresponds to the rear panel dimensions of
the panel PC. The recommended cutout sizes are shown below (
Figure 3-27
and
Figure 3-28).