Manual

PPC-37xxA-N26 Panel PC
Page 33
Step 3: Follow Steps 2 ~ 4 in Section 3.8.2 to install a hard disk drive to the panel PC.
Step 4: Replace the optical drive bracket.
3.9 Optical Disk Drive Installation (PPC-3712A-N26 Only)
To install an optical disk drive, please follow the steps below.
Step 1: Remove the back cover. See Section
3.5.
Step 2: Remove the optical drive bracket from the PPC-3712A-N26. To do this,
remove four retention screws, two on the side panel and two inside the panel PC
(
Figure 3-19).
Figure 3-19: Optical Drive Bracket Retention Screws