Manual

PPC-37xxA-N26 Panel PC
Page 20
 Anti-static Discharge: If a user open the rear panel of the panel PC, to
configure the jumpers or plug in added peripheral devices, ground themselves
first and wear and anti-static wristband.
3.3 Preinstalled Components
The following components are all preinstalled.
 Motherboard
 DDR3 memory module
 TFT LCD
 Touchscreen
Preinstalled OEM customizations may include the following.
 HDD
 Wi-Fi module
 Optical disk drive (PPC-3712A-N26 only)
3.4 Installation and Configuration Steps
The following installation steps must be followed.
Step 1: Unpack the PPC-37xxA-N26.
Step 2: Set the jumper settings (not usually necessary).
Step 3: Install the mSATA SSD, HDD and optical disk drive.
Step 4: Mount the PPC-37xxA-N26 panel PC.
Step 5: Connect peripheral devices to the bottom panel of the PPC-37xxA-N26.
Step 6: Configure the system.Step 0: