User guide

PPC-37xxA-N26 Panel PC
Page 30
Figure 3-14: Replacing the PPC-3708A-N26 HDD Bracket
3.8.2 PPC-3710A-N26 HDD Installation
To install the HDD into the PPC-3710A-N26, please follow the steps below:
Step 1: Remove the back cover. See Section
3.5.
Step 2: Remove the HDD bracket from the PPC-3710A-N26. The HDD bracket is
attached on the panel PC with four retention screws inside the chassis
(
Figure 3-15). Remove the four retention screws and lift the bracket off the
panel PC.