User guide

PPC-37xxA-N26 Panel PC
Page 26
Figure 3-6: mSATA/PCIe Mini Mode Selection Jumper Location
3.7 mSATA SSD Installation
The PPC-37xxA-N26 has one PCIe Mini slot on the solder side of the motherboard for
mSATA SSD installation. To install the mSATA SSD, follow the instructions below.
Step 1: Remove the back cover (Section
73.5).
Step 2: Remove the two hex nuts on the bottom panel (
Figure 3-7).
Figure 3-7: Hex Nuts on the Bottom Panel
Step 3: Remove all the cables connected to the motherboard.
Step 4: Release the motherboard from the panel PC by removing the four retention
screws (
Figure 3-8).