Owner's manual

PPC-37xx-N270 Panel PC
Page 58
Figure 4-35: LAN Connection
Step 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the onboard RJ-45 connector. Step 0:
4.12.3 Serial Device Connection
The PPC-37xx-N270 has three single male DB-9 connectors on the bottom panel for a
serial device. Follow the steps below to connect a serial device to the PPC-37xx-N270
panel PC.
Step 1: Locate the DB-9 connector. The location of the DB-9 connector is shown in
Chapter 2.
Step 2: Insert the serial connector. Insert the DB-9 connector of a serial device into
the DB-9 connector on the bottom panel. See
Figure 4-36.