Owner's manual

PPC-37xx-N270 Panel PC
Page 57
Figure 4-34: Secure the Rack/Cabinet Bracket
Step 5: Follow Step 4 and Step 5 of the PPC-3708A-N270 Cabinet and Rack
Installation procedures to complete the whole installation process.Step 0:
4.12 Rear Panel Connectors
4.12.1 Keyboard and Mouse Connection
Two PS/2 connectors on the bottom panel facilitate the connection of a mouse and a
keyboard. To connect either device, plug the PS/2 connector at the end of the device
(keyboard or mouse) cable into the PS/2 connector on the bottom panel.
4.12.2 LAN Connection
There are two external RJ-45 LAN connectors. The RJ-45 connectors enable connection
to an external network. To connect a LAN cable with an RJ-45 connector, please follow
the instructions below.
Step 1: Locate the RJ-45 connectors on the bottom panel of the PPC-37xx-N270.
Step 2: Align the connectors. Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the bottom panel of the PPC-37xx-N270. See
Figure 4-35.