Owner's manual

PPC-37xx-N270 Panel PC
Page 56
Step 5: Once the flat panel PC with the attached rack/cabinet bracket has been properly
inserted into the rack or cabinet, secure the front of the rack/cabinet bracket to
the front of the rack or cabinet (
Figure 4-33).
4.11.4.2 PPC-3710A-N270 and PPC-3712A-N270
Step 1: The back of the aluminum frame surrounding the LCD screen has retention
screw holes (PPC-3710A-N270 has 10 holes and PPC-3712A-N270 has 8 holes)
for a cabinet/rack installation bracket.
NOTE:
When purchasing the cabinet/rack installation bracket make sure it is
compatible with both the flat panel PC and the rack/cabinet into which
the panel PC is installed.
Step 2: Slide the rear chassis through the rack/cabinet bracket until the rear side of the
LCD screen frame is flush against the front of the bracket.
Step 3: Make sure the retention screw holes at the rear of the LCD screen are aligned
with the retention screw holes in the rack/cabinet bracket.
Step 4: Secure the rack/cabinet bracket to the PPC-3712A-N270 flat panel PC by
inserting the retention screws (
Figure 4-34).