Owner manual

PPC-37xx-N270 Panel PC
Page 55
Step 5: Tighten the screws that pass through the panel mounting clamps until the plastic
caps at the front of all the screws are firmly secured to the panel (
Figure 4-25).
Step 0:
Figure 4-25: Tighten the Panel Mounting Clamp Screws
4.13.2.2 PPC-3712A-N270
To mount the PPC-3712A-N270 flat panel PC into a panel, please follow the steps below.
Step 1: Install the panel mounting kit onto the real panel (
Figure 4-26).
Figure 4-26: PPC-3712 Panel Mounting Kit
Step 2: Select the position in the panel to mount the PPC-3712A-N270.