Owner manual

PPC-37xx-N270 Panel PC
Page 46
4.12.4 CF Card Setup
Jumper Label: JCF1
Jumper Type:
2-pin header
Jumper Settings:
See
Table 4-4
Jumper Location:
See
Figure 4-17
The CF Card Setup jumper sets the CF Type I card or CF Type II cards as either the slave
device or the master device. CF Card Setup jumper settings are shown in
Table 4-4.
CF Card Setup Description
Open Slave Default
Closed Master
Table 4-4: CF Card Setup Jumper Settings
The CF Card Setup jumper location is shown in Figure 4-17.
Figure 4-17: CF Card Setup Jumper Location
4.12.5 Clear CMOS Jumper
Jumper Label: J_CMOS1
Jumper Type:
3-pin header
Jumper Settings:
See
6Table 4-5
Jumper Location:
See
6Figure 4-18