User Manual

POC-17i/19i Series
Page 86
Step 10: Click FINISH to exit setup.
Figure 6-17: LAN Driver Installation Complete
6.5 Audio Driver Installation
To install the Realtek High Definition (HD) Audio driver, please follow the steps below.
6.5.1 BIOS Setup
Step 1: Enter the BIOS setup. To do this, reboot the system and press F2 during POST.
Step 2: Go to the Southbridge Configuration menu. Set the Audio Controller option to
[Azalia].
Step 3: Press F10
to save the changes and exit the BIOS setup. The system reboots.
6.5.2 Driver Installation
To install the audio driver, please do the following.
Step 1: Access the driver list from the driver CD
Step 2: Click Audio then double click on the folder which corresponds to your operating
system.